The DICOM Viewer allows you to record video for the selected image viewing window. If you use the View Multiple Series mode (see Section 2.8), then video will be recorded only from the selected window. If you are viewing multiple images in a series at the same time (see Section 2.9), then video will be recorded only for the left bottom image area (highlighted in red in fig. 2.14). The following objects will be recorded:
The following objects will not be recorded:
Video recording will be stopped if:
Video recording can be synchronized with playback (see Section 2.11). To start playback when recording a video and stop it after completing a video recording, click on the arrow on the right side of the button, select the Settings... item and in the dialog that opens, check the Start playback after recording starts box. If this box is checked then video recording will stop after the playback is stopped.
To set the frame rate, click on the arrow on the right side of the button, select the Settings... item and in the dialog that opens, enter the value into the Frames per second field.
To start recording video:
During video recording, the button looks like . To stop video recording, click the left side of the button. After the video recording is completed, the Video record was stopped message appears.