Functionality is available in the Pro edition
SUV (Standardized Uptake Value) is a value reﬂecting the intensity of contrast accumulation in tissues. To measure the SUV:
Open a series suitable for SUV measuring.
Select the Image main menu, select the SUV item and the Show SUV command. If the selected series is not suitable for SUV measuring, then the Show SUV command is disabled. If SUV measuring is already activated, then the Show SUV command is marked with a ﬂag.
If necessary, change the CLUT to [WL]PET by selecting it from the drop-down list or by pressing the Shift+F8 key combination on the keyboard. For details, see Section 2.20.1.
If the data contained in the study is insuﬃcient, then the dialog shown in Fig. 2.74 appears. Specify the following data:
SUV Type. Choose one of four ways to measure SUV:
by body weight: SUV Body Weight (SUVbw);
by body surface area: SUV Body Surface Area (SUVbsa);
by the body mass index according to the James method: SUV Lean Body Mass (SUVlbm James); For men:
by the body mass index according to the Janmahasatian method: SUV Lean Body Mass (SUVlbm Janmahasatian);
Patient weight (Kg) (optional for the method of calculating by body surface area);
Patient height (cm);
Injected dose (MBq);
Injection date time;
Acquisition date time;
Sex (optional for the method of calculating by body weight and by body surface area);
if it is necessary to display the SUV measurement results for ROI tools then check the Use SUV for ROI tools box.
To measure the SUV, click OK, to cancel the operation, click CANCEL. If there is not enough data to calculate (for example, the patient‘s weight or height is not speciﬁed or is zero), then the OK button is disabled.
To change the SUV calculation settings, select the Image main menu, select the SUV item and the Settings... item.
When the SUV measurement is activated, the value at the point where the cursor is located appears in the top left-hand corner of the window. For example: SUVlbm: -0.092 g/ml. Move the cursor over the image to measure the SUV. Please note that the Display information button must be pressed (see Section 2.24).
To calculate the SUV in a particular area or point, use the ROI tools (see Section 2.17.5). Please note that the Use SUV for ROI box must be checked in the SUV settings.
If the time and the date of the series creation is grater than the time and the date of the study, then the message Warning: This series may be post-processed in which date of series creation unrelated to acquisition appears in the SUV Settings dialog.
To disable the SUV measurement, select the SUV in the main menu Image and select the Show SUV command. The density information will be displayed for the built ROIs.