To change the Resampling ﬁlter, open the MPR main menu, select the Resampling ﬁlter menu item and in the submenu that opens, select a ﬁlter. The active ﬁlter is marked with a ﬂag.
The following ﬁlters are available:
By default the Bilinear ﬁlter is active.
|When ﬁlters are used (except for the Bilinear ﬁlter), distortions may occur. If you see any dubious artifacts, select the Bilinear ﬁlter.|