5.3. Resampling filter

To change the Resampling ﬁlter, open the MPR main menu, select the Resampling ﬁlter menu item and in the submenu that opens, select a ﬁlter. The active ﬁlter is marked with a ﬂag.

The following ﬁlters are available:

Bilinear;
B-spline;
Mitchel;
Catmull-Rom;
Lanczos3;
Lanczos5;
Lanczos7.

By default the Bilinear ﬁlter is active.

When ﬁlters are used (except for the Bilinear ﬁlter), distortions may occur. If you see any dubious artifacts, select the Bilinear ﬁlter.