6.5 Building surface

____________________________________________________________________________________________

Functionality is available in the Pro edition
____________________________________________________________________________________________

The DICOM Viewer allows you to create a surface for segmented structures and base volume in the Volume Reconstruction window and in the Multiplanar Reconstruction window. In multiphase series, you can build a surface for base volume of the each phase.

PIC Attention! Surfaces transparency is not supported if:
  • a CPU has been chosen as the render device;

  • the software was installed on macOS lower operating system than 10.15.

PIC On macOS 10.15 and later, it is recommended to use a visualization device that supports Metal polygonal and voxel rendering. The settings are described in Section 16.7.3.

On the segmented structures list, select the base volume or the structure for which you want to build a surface.

To customize the parameters used by default when building a surface, click the Parameters  PIC button on the segmented structures panel and select the Default surface parameters... option. In the dialog box that pops up (Fig. 6.11), provide the required default parameters for building surfaces.

To build a surface, click on the Create surface for current structure PIC button on the segmented structures list. The surface is built according to the current settings.

To customize the parameters for each of the surfaces built, unfold the surface properties tree on the segmented structure panel (see Fig. 6.10). Click the PIC Change surface creation parameters button.


PIC

Figure 6.10: Surface parameters


Set the surface parameters in the dialog box that pops up (see Fig. 6.11).


PIC

Figure 6.11: Surface creation parameters


To apply the settings, click OK. To cancel, click CANCEL.

When the segmentation project is saved, all the surface building parameters are saved in the file. For details on saving projects, see Section 6.11.

The surface is represented by a polygon model made of triangles.

The program automatically determines the maximum possible number of triangles required for creating a surface imitating the volume surface. The number of the triangles making up the surface may be changed on the Segmented structure panel.

To change the number of the triangles making up the surface, unfold the surface properties tree on the Segmented structure panel (Figure 6.10).

Double-click with the left mouse button on the value in the field with a triangle icon. Change the value showing the number of triangles and press Enter key on the keyboard.

If the number of triangles entered is too small or too large to build a surface, the DICOM Viewer will use the value from the permitted range which is the closest to the value provided by the user.

If the entered value equals 0, the program will build a surface using the maximum possible number of triangles which will be shown in the field with a triangle icon.

If visibility for this structure or surface is disabled, you cannot use the cutting tools, as well as the Segmentation from point by mask, Region growing and Vessel tree segmentation tools.

You can only edit hidden structures with intelligent volume editing tools, such as Grow (dilation), Shrink (erosion), Remove noise (opening), Remove holes (closing) (for details see Section 3.8.7) , as well as with the Union, Subtract, Subtract dilated, and Intersect tools (for details see Section 6.9). In this case, the following message pops up: "The target structure is hidden. Are you sure you want to apply the operation to it?" Click Yes to proceed or No to cancel.